Your ZSK machines already know how your factory really runs. The Poolbox collects their data, MyZSK stores it, and the MyZSK API hands it to you — so you can build your own hub for Lean, maintenance, costing and your team.
Most embroidery shops plan, price and pay on gut feeling. The Poolbox in your hall listens to every ZSK machine and pushes the data out — securely, continuously, without anybody typing a number.
T8 / T10 control reports status, needle, stitch counter, design and thread breaks.
1 – 24 headsData collector in your hall. Collects from all machines and pushes the data out.
+ RFID reader & tokensCloud or on-premise. Dashboards, alarms by e-mail, history, locations and halls.
OPC UA readyRead-only REST API with your own key — plus a connector for Claude.
REST · JSON · X-API-KeyShop-floor screens, operator app, ERP feedback, bonus, costing — your way.
Supabase · Vercel · ERPThe best machine is only as effective as the process around it. MyZSK makes the hidden minutes visible.
Lean: you see where the hours go — waiting, re-threading, bobbins, hooping — and fix the biggest loss first.
Costing: you know your real stitches per hour, so every quote is calculated, not guessed.
People: operators see their own performance, report problems in seconds and earn a fair stitch bonus.
A typical embroidery plant: 1-head, 4-head, 6-head and 8-head machines in two halls. Click any machine. This is what the MyZSK API gives you — here with demo data.
Lost time by cause, valued at your machine-hour rate. Fix the top bar first.
Found automatically in the thread-break pattern — before the machine stops.
Demo data generated for illustration, modelled on real MyZSK data structures (status codes, heads, needles, tokens). Your hub shows your own machines.
Each one answers a question you can't answer today — with an endpoint of the MyZSK API behind it.
Run-time ratio per machine, shift and hall on a TV in the hall. Everyone sees the same truth — every hour.
One needle breaks again and again? Check needle and thread path. All needles of one head? Check the hook timing. Your service team knows before the machine stops.
Measured minutes per design and real stitches per hour per machine type. Your price is calculated before the quote leaves the house.
Operators log in with their RFID token, see their own efficiency, report problems and earn a transparent bonus.
"Waiting for new pattern" is often the biggest loss. Measure it, then move hooping off the machine — e.g. with hoop stations and the ZSK EPS.
For automotive and technical embroidery: machine, design, operator, thread breaks and climate data documented per order — automatically.
Early, late and night shift side by side: stitches, run-time ratio and restart time after a thread break. Learn from your best shift.
Drop orders on machines and see the week fill up — calculated with measured minutes per design, not catalogue values.
Stitches, pieces and run-time ratio month by month. See whether improvements last — and present them to your team.
A simple phone app on top of the MyZSK API. Try the buttons — this is a working prototype.
Hold your token to the reader at the machine
Every operator logs in and out with an RFID token. That gives you hours present, stitches, pieces and quality per person — the basis for a fair stitch bonus. The index compares each person with what their machine type can do, so a 1-head operator competes fairly with an 8-head operator.
Pay a bonus for every index point above target. Change the rules — the ranking updates.
An embroidery factory is best calculated per hour: what does one machine hour cost, and how many stitches do you really make in that hour? Once you know both, every request — small, medium or large motif — has a price in seconds.
Small seconds add up. Faster colour changes, frame recognition, .z00 files with colour information and higher speed save time on every design. With MyZSK you take your own numbers — designs per day, colour changes, net stitching time — instead of estimates.
Example calculation following CARL 04/2026 ("Faster returns than expected"): € 65/h, 15 designs/day, 220 days → approx. € 23,000 per machine and year. Fast colour change 6.1 s → 2.1 s (needle 1–12). Bobbin changer: approx. +15 % up-time. Not a binding offer.
You don't need an IT department or an MES project. With a MyZSK API key, three free-to-start services and an AI assistant, a small team builds its first hub in days.
Your machine data. Read-only, secured with your X-API-Key.
Database, operator log-ins and a scheduled function that pulls the API every 15 minutes.
Hosts your dashboard and operator app. Every change goes live in a minute.
Your code, versioned. Nothing gets lost, everything can be undone.
Reads the API docs and writes the code with you — or answers questions about your factory directly via the MyZSK connector.
/machineslive status, design, stitch counter, remaining time/locations · /datacollectorsplants, halls and Poolbox units/operators · /work-periodsRFID tokens and shifts/reports/machine-summarystitches, pieces, time per status — the heart/reports/threadbreaks-by-machine/aggregatedbreaks per head and needle/reports/operator-overviewperformance per operator token/reports/runningtimeminutes per design, outliers filtered/status-codesplain text for every status (DE/EN/IT)Full documentation: embroidery-api.com
Paste these into Claude together with your API key (in a safe place, not in the chat history of a shared account). Prompts are in English — Claude answers in your language.
Customers, auditors and the EU increasingly expect digital, traceable production data. With MyZSK you already collect it.
Users of connected products have a right to access the data their machines generate. From September 2026, newly launched connected products must be designed for data access. MyZSK and the API make that access practical.
The new EU Machinery Regulation (EU) 2023/1230 replaces the Machinery Directive — with digital instructions and requirements for protection against corruption of connected machinery.
Automotive, workwear and brand customers ask for traceability, capacity proof and reliable delivery dates. Real machine data answers these questions in minutes instead of days.
Increased depreciation on new, interconnected 4.0 machines — up to +180 % on investments up to € 2.5 M. Goods must be made in the EU/EEA, and interconnection must be proven: exactly what the Poolbox and MyZSK deliver.
Declining-balance depreciation of up to 30 % per year (3× the straight-line rate) for movable assets — more liquidity in the first years after buying a new machine.
Equipment acquired after 19 January 2025 can be written off in full in the first year. Section 179 allows up to $ 2.56 M in 2026.
A well-maintained used ZSK machine keeps its value. Its sale often covers the down payment — the monthly instalment is then compared with the monthly productivity gain.
Overview for orientation only, not legal or tax advice. Please check your specific obligations and eligibility with your tax advisor.
Already running ZSK machines? We connect them with a Poolbox, activate MyZSK and your API key — and help you build your first hub. Your contact is a ZSK engineer, not a call centre.